find out your self :)(
teeth and egg shells are alike because both o then are made of calcium salts:)
My thermometer is a safety 1st, and to change the celsius to Fahrenheit you press down both buttons (power and mode) at the same time and it will switch.
I just did this a few minutes ago and it took me over twenty minutes. From the owners manual: Remove the two screws holding the headlight assembly in place. Remove the three push in fasteners which are holding the bumper cover down. **edit** you dont have to take the fasteners out. When ur looking straight on to the light, pull the light to the right and the left part out, then starting from the left pop out the light from under the bumper, its gonna take some yanking but you'll get it.** What you have to do now is `pry` the headlight assembly out and over the bumper. This took me quite a which to figure out. I manually pushed the lip of the bumper cover under the headlight and then pulled the assembly out. Good luck with this part. After this it is pretty straight forward. Turn the retaining ring counter clockwise to unscrew it. Then unplug the bulb. Insert the new bulb. Test it by turning on your high and low beams to make sure it works. Reassemble. Good luck, Sean